Calculated Industries 5060 - Manual (Page 16)

14 — ElectriCalc Pro
♦ Second Press
Displays the maximum adjusted am-
pacity of the calculated parallel wire
size. Displays: WIRE A.
NOTE: No adjustments are made for
deration.
S P— Derated Wire Size
Used to calculate derated wire sizes
and allowable ampacity based on the
entered quantity of wires, NEC Table
310-16 and NEC Table 310-15(b)(2)(a).
Derated wire sizes are not calculated
when there are less than four wires, or
when the unit is in Free Air mode.
♦ First Press
Calculates the derated wire size, if you
have entered the number of wires, for
example,
4 S P
Displays: D/R WIRE SIZE.
♦ Second Press
Displays the maximum adjusted am-
pacity of the derated wire size.
Displays: D/R WIRE A.
♦ Third Press
Displays the derated adjustment factor
per the NEC Table 310-15(b)(2)(a).
Displays: ADJ %.