Calculated Industries 5060 - Manual (Page 27)

User’s Guide — 25
Preference Settings
Your calculator has the following Pref-
erence Settings that you can access
and change at any time.
Access the Preference Settings by
pressing
S ÷. Then, to access
each category, press the
÷
key until
the desired setting is reached. Within
each category, press the
+
or
–
keys
to toggle between individual selections
(note: the
+
will advance, the
–
will
back-up).
You can change these settings at any
time by repeating the above, and set-
ting in a new preference.
NOTE: To return the Preferences to the
default settings, either perform a full
reset by using a paperclip to press the
RESET located at the bottom-right of
the back of your calculator, or manually
set them back using the keystrokes
below.
The Preference Settings are (default
settings shown first):
To Set 2005, 2002, 1999, or 1996 NEC
code:
S ÷ (1st press of ÷)
NEC 2005
+
NEC 1996
+
NEC 1999
+
NEC 2002