Calculated Industries 5060 - Manual (Page 31)

User’s Guide — 29
New 2005 Functions
The default NEC setting is now 2005.
This will be displayed after performing a
Clear All
S x.
The NEC Preference Settings (see pref-
erence settings on page 26) will now
include 1996, 1999, 2002, and 2005.
NEC Wire Table Identification
The ElectriCalc Pro now displays the
NEC Table referenced when performing
Wire Size calculations. This feature
works with the following functions: Wire
Size
w, Ground Wire G,
Equipment Ground Wire
S Gg
and Derated Wire Size
S P.
Kw-hr Btu – Kilowatt Hours to BTU
function
New function that allows you to calcu-
late BTU (British Thermal Unit) rating
based on an entered Kilowatt Hour
value. This function is accessed by
pressing
S •.