Calculated Industries 9226 - Manual (Page 48)

Calculator Information
Accuracy/Display
For standard calculations, each calcu-
lation is carried out internally to 10
digits and is rounded to a 7- or 8-digit
standard display. A 5/4 rounding tech-
nique is used to add 1 to the least sig-
nificant digit in the display if the next
non-displayed digit is 5 or more. If this
digit is less than 5, no rounding occurs.
For remaining frame calculations
(time code), you can set the calculator
to round the remaining frame value
based on 5/4 rounding or truncate the
value. To truncate, press the [Prefs] key
successively until “5/4” appears at the
left display area. To turn 5/4 frame
rounding off, press [+] once; you will
see the word “OFF” on the main dis-
play.
A
PPENDIX
48 – Frame Master ® II