Calculated Industries 9226 - Manual (Page 27)

Entering Time and Time Code Units
To enter only hours or only minutes,
etc., use the colon key to skip to the next
time unit. For example, you would press
[ O n / C ] [ O n / C ]
[H:M:S] 3 [:] [:] 2
to enter a value of 3 hours and 2 seconds
(remember to press a time code or the
real-time key first, if necessary).
You can enter decimal seconds in real
time mode [H:M:S] only (for example,
pressing 2 [.] 32 enters 2.32 seconds).
30 NDF Unit Keystrokes Display*
Clear calculator [On/C] [On/C] 0:00:00
Change mode [30 NDF] 0:00:00:00
Hours 6 [:] [:] [:] [=] 6:00:00:00
Minutes 9 [:] [:] [=] 0:09:00:00
Seconds 7 [:] [=] 0:00:07:00
Frames* 12 [=] 0:00:00:12
Hours & Minutes 6 [:] 9 [:] [:] [=] 6:09:00:00
Hours & Seconds 6 [:] [:] 7 [:] [=] 6:00:07:00
Hours & Frames* 6 [:] [:] [:] 12 [=] 6:00:00:12
Minutes & Seconds 9 [:] 7 [:] [=] 0:09:07:00
Minutes & Frames* 9 [:] [:] 12 [=] 0:09:00:12
Seconds & Frames* 7 [:]12 [=] 0:00:07:12
* Note: You cannot enter or display frames in
real-time mode [H:M:S]. Pressing [=]
after each entry, completes that entry.
User’s Guide – 27