Calculated Industries 9226 - Manual (Page 11)

[On/C] — On/Clear Key
Turns power on. If on, pressing once
clears the last entry and the display.
Pressing twice clears all temporary
registers.
[Conv] — Convert Key
Used with the Mode keys to convert
between Modes. Also used to access
special 2nd functions.
[Rcl] — Recall Key
Recalls values stored in any register.
Press [Rcl] and then the key you
wish to display the value of. For
example, [Rcl] [fps] displays the
value stored for film speed.
[Stor] — Store key
Used for permanent storage of up to
10 separate, non-accumulating values
in the 0-9 Memory locations. Also
used to set values for film frames per
second, film speed, film size and cus-
tom time code speed.
[:] — Colon key
Separates multiple entries for real
time, time codes, film footages, etc.
User’s Guide – 11