Calculated Industries 9226 - Manual (Page 38)

Setting Frames Per Foot (f/ft)
The values for physical frames-per-foot
(f/ft) can be adjusted for each type of
film. The default values are:
Film Type Frames Per Foot
16mm 40
35mm 16
Custom 24
Setting a New Value
(1) Clear the calculator and select dec-
imal mode.
[On/C] [On/C] [Dec]
(2) Enter the number of frames per foot
you want to set (up to 99 f/ft).
20
(3) Press [Stor] then a film type key to
save this frames-per-foot value for
that film type.
[Stor] [16mm]
(4) Press [Rcl] [16mm] to verify your
entry.
[Rcl] [16mm] — 20
(5) Reset to 40 fps and verify.
40 [Stor] [16mm] [Rcl] [16mm] — 40
38 – Frame Master ® II