Calculated Industries 9226 - Manual (Page 42)

(6) You can use other keys and functions
while the timer is counting. If you
are counting down, the calculator
will beep three times and flash the
display when the timer reaches zero.
Press:
[Go/Stop] to re-display the timer.
Press again to stop.
[Mark] to record the current
time value to a list which
can be recalled.
[Rcl]
[Mark] Recall the marked points
(including start).
[On/C] To clear stopped and dis-
played timer value.
Using Timer Values
You can use a timer value in your cal-
culations or you can store the value.
Calculating with Timer Values
(1) Press [Go/Stop] to freeze the dis-
play.
[Go/Stop]
display: 1:30:25:00
42 – Frame Master ® II