Calculated Industries 9226 - Manual (Page 44)

(2) Press [Go/Stop] to end Timing.
(While not mandatory, it is highly
recommended that you not recall
the marked values while the Timer
is active and running.)
[Go/Stop]
(3) Press [Rcl] [Mark] to recall the first
value stored. Press [Mark] to scroll
through additional marked points.
When displayed, these values may
be stored in Memory registers (us-
ing [Stor] [0…9]) or entered into
the In/Out registers for Duration
calculation (using [Stor] [In], [Stor]
[Out]).
[Rcl] [Mark]
[Stor] [0…9] for Memory, or
[Stor] [In]/[Out] for Duration calc.
(4) The recorded mark points are
cleared when the timer is cleared
and restarted or when the calculator
is turned off.
44 – Frame Master ® II