Calculated Industries 9226 - Manual (Page 41)

Counting Up or Down
If you do not select a mode, the timer
defaults to the last timer mode you
used. (The initial default timer mode is
real time with one decimal place.)
(1) Select a timer mode (see “Prefs”).
[Prefs] [Prefs] (then) [+] or [–]
(2) To count up from zero, press:
[Go/Stop] [Go/Stop]
(3) To count up from a value other
than zero, enter the time you want
and then press [Go/Stop].
[Go/Stop] 1 [:] 10 [:] [Go/Stop]
(4) To count down from a value other
than zero, enter the time you want
to count down from and then press
[Conv] followed by [Go/Stop].
[Go/Stop] 1 [:] 10 [:]
[Conv] [Go/Stop]
(5) While the timer is counting, you
will see the clock symbol flashing
on the bottom left of the display.
The star symbol will also appear if
the timer buzzer is on and the timer
is counting down.
GO
★ 0:01:08
User’s Guide – 41