Calculated Industries 9226 - Manual (Page 26)

separate the different elements such
as hours, minutes, seconds, frames,
and feet-frames. However, this is
generally unnecessary except as a
means of entering zeroes in slotted
locations.
Example: Using “Auto-Entry”
To use auto-entry to enter a 30 Drop
Frame time code of 5:08:06:11, you
would press:
[ O n / C ] [ O n / C ]
[ 3 0 D F ] 5 0 8 0 6 1 1
Note that you need to specifically enter
zeroes in front of the 8 and 6.
Example: Using Colon Entry
To enter the same value using direct
entry, you would press
[ O n / C ] [ O n / C ]
[ 3 0 D F ] 5 [:] 8 [:] 6 [:] 11
You do not need to enter zeroes when
you use the colon key.
26 – Frame Master ® II