Calculated Industries 9226 - Manual (Page 18)

[Mark] scrolls through the marked
points which can be stored to Mem-
ory, used with In/Out/Duration or
operated on using the calculator’s
math functions.
Special Functions Using [Conv]
[Conv] [Mark] — Marks Reverse Order
Scrolls through mark points in re-
verse order.
[Conv] [Prefs] — Prefs Reverse Order
Scrolls through Preferences in re-
verse order.
[Conv] [Sum] — “Subtract”
Stores the displayed value as a nega-
tive sum value — i.e., subtract it.
[Conv] [÷] — Remainder
Displays any frames remaining after
dividing or converting frame, film
footage, or time code values.
[Conv] [x] — All-Clear
Clears all values including memory.
Resets all permanent registers and
preferences to default settings.
[Conv] [–] — Change-Sign Function
Toggles the sign of the displayed value.
18 – Frame Master II ™