Boomba Racing ST Focus Aluminum Shifter Base Bushings - Manual (Page 2)

1 Remove plastic vacuum hose from rubber
adaptor on the top of valve cover (leave
rubber adaptor in place).
13
Remove the center console by pulling it
back and up.
14
Disconnect the shifter cable links.
15
Remove the shifter base screws.
16
Remove the shifter cables. Pull the spring
loaded ring away from the shifter base to
release the shifter cable.
17
Remove steel sleeves from the shifter
base.
18
Remove rubber grommets from the shifter
base.
19
Prepare Boomba Racing solid shifter
bushings.
20
Install the shifter cables.
21
Place bottom bushings under the shifter.
Bottom bushing have larger diameter step
and counter bore in the center.
22
Place top bushings over the shifter. Top
bushings have smaller diameter step.
Secure the shifter assembly to the floor.
Reconnect the shifter links.
23
Install the center console.
24
Install the parking brake cover. Install the
change holder panel. Install the left cover
panel.
25
Install the trim panel and secure it with
screws.
26
Reconnect the power and the USB
connectors.
27
Install the right cover panel.
28
Install the shift knob. Turn the shifter knob
in until the reverse lock stops catching on
the shifter cover.