Boomba Racing Ford Fiesta ST Rear Motor Mount - Manual

FORD FIESTA ST
MOTOR MOUNT
1 Remove plastic vacuum hose from rubber
adaptor on the top of valve cover (leave
rubber adaptor in place). 1 When lifting the car
always use stands to
secure the car. 2 Remove the cat support bracket. 3 Remove the factory motor mount 4 Boomba Motor Mount ready for
installation.
5 Secure the Boomba Motor Mount to the
transmission and to the frame. 6 Reinstall and secure the cat support
bracket.
MATERIALS REQUIRED
None
TOOLS REQUIRED
M13 socket wrench