Boomba Racing SRT-4 Dodge Fuel Rail - Manual

Racing, inc. Racing, inc.
Www.boombaracing.com
FUEL RAIL
INSTALLATION MANUAL
MATERIALS REQUIRED
None
1 Remove plastic vacuum hose from rubber
adaptor on the top of valve cover (leave
rubber adaptor in place). 1 Remove fuel rail cover. 2 Disconnect the fuel line. 3 4
5 Remove wire harness clips. 6 Using a small screwdriver, remove fuel
injector clips.. 7 8 Remove fuel rail bolts.
9 Gently pull rail toward front of the car.
10
Clean up all fuel spills.
11
Carefully remove the fuel line clip from the
stock rail.
12
Install the fuel line clip on Boomba fuel
rail.
TOOLS REQUIRED
M13 socket wrench
M6 Allen wrench
Flat Screwdriver
Pliers