Boomba Racing ST Ford Focus Rear Motor Mount - Manual

FORD FOCUS ST MOTOR MOUNTS
INSTALLATION MANUAL
MATERIALS REQUIRED
None
1 Remove plastic vacuum hose from rubber
adaptor on the top of valve cover (leave
rubber adaptor in place). 1 When lifting the car
always use stands to
secure the car. 2 Remove the splash pan bottom lip. 3 Remove the splash pan. 4 Remove the exhaust support bracket
screws.
5 Remove the exhaust support bracket rear
nut. 6 Remove the exhaust support bracket. 7 Remove the motor mount bolts. 8 Remove the wishbone mount bolts.
9 Remove the wishbone rear bolt.
10
Remove the factory torque arm.
11
Install the Boomba motor mount.
TOOLS REQUIRED
Set of car stands
M15 socket wrench
M15 box wrench T30 Torx bit
M13 socket wrench
M13 box wrench
12
Install the Boomba wishbone mount.
Hand tighten mounting bolts.