Boomba Racing Kia Optima Blow Off Valve - Manual

Racing, inc. Racing, inc.
Www.boombaracing.com
BLOW OFF VALVE
INSTALLATION MANUAL
MATERIALS REQUIRED
None
1 Remove plastic vacuum hose from rubber
adaptor on the top of valve cover (leave
rubber adaptor in place). 1 Loosen up the battery terminal bolts. 2 Remove the battery terminals and unplug
battery temperature sensor. 3 Loosen the battery clamp and remove the
battery. 4 Disconnect vacuum hose from the BOV
and remove the ground wire.
5 Remove BOV bolts and remove BOV. 6 Assemble Boomba BOV and gasket. 7 8 Align the opening in the turbo housing
with the opening in BOV, and then bolt on
BOV.
10
Connect the vacuum line and ground wire.
11
Install the battery, connect the battery
temperature sensor and battery terminals.
TOOLS REQUIRED
M10 socket wrench
M12 socket wrench
Screwdriver
Pliers
9
12
BOV SPRING COLOR CHART
WHITE 13 psi
GRAY 16 psi
BLACK 19 psi