Bird Technologies 8640B Series - Manual (Page 20)

Installation
9
Connecting RF Power
After installing the Moduload, the RF transmission line can be
attached using standard coaxial line coupling kits.
Swivel Flanged Coupling:
To couple the swivel flange with a flanged
RF transmission line, use an appropriate coupling kit. Refer to
Figure 4 while following the instructions below:
-80
-60
-40
-20
0
20
40
T
e
mperatu
re,
Degrees
Fa
hrenhe
it
10 20 30 40 50 60
% Ethylene Glycol
Specifications for ethylene glycol
having: specific gravity 1.125 @
32°F; specific heat .575 @ 68°F
WARNING
Never attempt to connect or disconnect RF equipment from the
transmission line while RF power is being applied.
Leaking RF energy is a potential health hazard.
Figure 4
Swivel Flanged
Coupling
BOLT BULLET LOAD RF COAXIAL LINE