Bendix Commercial Vehicle Systems COMPACT 500 9/87 - Manual (Page 12)

12
FIGURE 16
PISTON REMOVAL & DISASSEMBLY
9. While preventing rotation of the input shaft, remove the
spindle, valve body and piston from the housing. (See
Figure 16) Remove the two O-rings(19) from the valve
FIGURE 17
51
50
29
49
46
47
TOOL 297678
FIGURE 18
FIGURE 19
body. (See Figure 17) Remove the O-ring(47) and two
back-up rings(46) from the piston groove. (See Figure
18) Remove the snap ring (51) and tube cover(50) and
lift out and remove both halves of the ball return tube(49)
(7 balls inside). (See Figure 19)