Autocue WINCUE - Manual (Page 60)

WINCUE USER GUIDE CHAPTER 9 – WINCUE RUNDOWNS
60     AUTOCUE LTD. 2002
9.2.4 Moving Stories within the Running Order
The stories within a rundown can be reordered very easily using the drag and drop facility in WinCue.
Drag-and–drop is the easiest way to move a story within a Rundown. Select the story you want to move by
pointing to it and hold down the left-hand mouse button. When the drag and drop pointer appears,
drag the dotted insertion point to the new location. Release the mouse button to drop the story in its new
place in the runorder.
9.2.5 Renumbering Stories in the Rundown
The stories within a rundown can be renumbered at any stage when lines are added or deleted. Open the
Rundown menu, and select Renumber items.
9.3 Editing within the Rundown
It is possible to edit the rundown and the attached stories in the rundown window. This will be quicker and often
more convenient than the pull-down menus. To do this click once with the right mouse button on the story you wish
to edit. A menu appears next to the cursor. This section describes the commands available from this menu.
9.3.1 Adding a new script
Open the Story menu and select New Script or New Break Script,
OR press Insert on the item in the Rundown you want to insert above,
OR you can right-click on the item you want to insert above and select New Script or New Break Script
from the popup menu.
9.3.2 Editing a Script
Select the item you want to edit, open the Story menu and select Edit,
OR press Enter on the selected item,
OR you can right-click on the item to edit and select Edit Script.
9.3.3 View Story
If you don’t want to edit a story you can view it only but right-clicking on that item and selecting View Story
from the pop-up menu.