Autocue WINCUE User Manual
Page 22
WINCUE USER GUIDE
CHAPTER 4 – CONFIGURING WINCUE
22
AUTOCUE LTD. 2002
The blank button is usually configured as the Cue Story button which ensures the cue marker is at the end of the
previous prompted story and not inside the next prompted story. This is so that if the next item is dropped the cue
marker remains at the correct position in the rundown waiting to cue the actual next story.
4.2.3 The End Stop Table
Now click on the End Stop Table window tab. Here you can change the scroll rate. The default incrementation
factor settings are usually set for normal operation.
4.2.4 The Centre Stop Table
If you have your controller mode set to Centre Stop mode then you can change the settings by clicking on the
Centre Stop Table tab.