Autocue WINCUE User Manual
Page 42
WINCUE USER GUIDE
CHAPTER 7 – THE SCRIPT EDITOR
42
AUTOCUE LTD. 2002
7.1.2
The Word Count (Link time) Box
As you type a script WinCue will keep track of the number of words in the script. The current word count
appears in the Words box and is constantly updated.
7.1.3
The Script Duration Box
The time taken for a person to read a script from the prompter screen will depend on the number of words
in the script and how fast that person reads. WinCue uses the current word count and the presenters read
rate to calculate the duration (Link time)of the script. The script duration in seconds is displayed in the Link
box and is updated as you type. The default presenter’s read rate of 180 words per minute is used unless
you are using a presenter with a modified read rate.
See Section 8.3 Changing a Presenter’s Settings.
7.1.4
Undo and Redo
You can undo and redo changes made in the Script Editor in the same way as any other word processor.
To Undo the last changes press CTRL+Z. You can undo each change since the last time you saved the
script. To Redo changes press CTRL+Y.
7.2
Adding a Presenter Name to a Script
To add a presenter name to the script open the Insert menu and select Presenter: