Rockwell Automation 20D PowerFlex 700H/700S AC Drives Frame 10 & 12 Main Fan Capacitor Replacement Kit - Manual (Page 4)

4 Rockwell Automation Publication PFLEX-IN025B-EN-P - September 2011
PowerFlex 700H and 700S AC Drives Frame 10 and 12 Main Fan Capacitor Replacement Kit
Step: 2 Remove the
Protective Covers You must first move the control frame (on frame 12 drives, left-hand enclosure
only) and remove the air flow plate from the drive in order to access the
protective covers on the drive.
1. If you are moving the control frame on a DC input drive with a precharge
interlock, disconnect the input wiring to the X50 terminal block on the
control frame.
2. Loosen the two hexalobular screws that secure the control frame to the
enclosure and swing the control frame away from the drive.
Loosen two screws and
swing control frame out
If present, remove
wiring from X50
terminal block