Rockwell Automation 20D PowerFlex 700S/700H Frame 10...14 Drives Maintenance Stand - Manual (Page 3)

3
Publication PFLEX-IN014B-EN-P
What You Need to Do ❐ Step 1: Determine the frame size of the drive (see below).
❐ Step 2: Assemble the rails (see page 4 ).
❐ Step 3: Assemble the bottom of the stand (see page 5 ).
❐ Step 4: Attach the top to the legs (see page 6 ).
❐ Step 5: Attach the rail assemblies to the top of the stand
(see page 7 ).
❐ Step 6: Attach the stand to the drive (see page 8 ).
❐ Step 7: Level the stand (see page 9 ).
Step 1: Determine the Frame
Size of the Drive You need to know the frame size of the drive. Determine this by checking the
data nameplate on the control frame. The frame number is printed just above the
serial number.
Cat No. 20D J 500 N 0 NNNBNNNN
UL Open Type/IP00
540V 650V
Normal Duty Power 250 kW
200 kW 450 kW
500 kW
Heavy Duty Power
DC Voltage Range 462 - 594
350 583 - 713
350
Amps
Input: DC,
AC Voltage Range 0 - 400
50 Hz 0 - 460
60 Hz
Base Hz (default)
Output: 3 Phase, 0 - 320Hz
Continuous Amps 420/500
630/550 420/500
630/550
1 Min Overload Amps
2 Sec Overload Amps
840/630 840/630
MFD. in 1989 on Nov 9 Frame #: 10
Serial Number: 2622381652
2622381652
MADE IN THE USA (FAC 1B)
Series: A
Standard I/O: NONE
Original Firmware No. 2.04
UL
US C
Æ
LISTED
IND CONT EQ
9D42
Frame #: 10
Cat No. 20D J 300 N 0 NNNBNNNN UL Open Type/IP00 540V 650V Normal Duty Power 160 kW
132 kW 250 kW
200 kW Heavy Duty Power
DC Voltage Range 462 - 594
350 583 - 713
350 Amps Input: DC,
AC Voltage Range 0 - 400
50 Hz 0 - 460
60 Hz Base Hz (default) Output: 3 Phase, 0 - 320Hz
Continuous Amps 300/245
330/368 300/245
330/368 1 Min Overload Amps
2 Sec Overload Amps 450/490 450/490 MFD. in 1989 on Nov 9 Serial Number: 2622381652 2622381652 MADE IN THE USA (FAC 1B)
Series: A Standard I/O: NONE Original Firmware No. 2.04 UL US C Æ LISTED IND CONT EQ