Rockwell Automation T8110B/T8110 Trusted TMR Processor - Manual (Page 13)

Trusted
TM
TMR Processor T8110B/T8110
Issue 18 Feb 08 PD-T8110B/T8110 13
rim_interval
The value is specified in milliseconds. It specifies the minimum amount of time that must elapse
between polls of Trusted
TM TMR Interface modules.
Changes to this value are reflected by the system immediately after the System.INI is loaded.
Format :
rim_interval=xx
Default is 0.
pim_interval
The value is specified in milliseconds. It specifies the minimum amount of time that must elapse
between polls of the Trusted
TM Communication Interface modules.
Changes to this value are reflected by the system immediately after the System.INI is loaded
Format :
pim_interval=xx
Default is 0.
discrepancy_val
The value is specified in milliseconds. It specifies the time that a TMR input or output channel must be
discrepant before the TMR Processor reports the Channel Discrepancy fault.
The value applied here will affect all TMR NIO modules (not Dual NIO modules).
Changes to this value are not implemented until the TMR Processor is rebooted after the download of
the System.ini file.
Format :
discrepancy_val=xx
Default is 2000.
dual_discrepancy_val
The value is specified in milliseconds. It specifies the time that a Dual input or output channel must be
discrepant before the TMR Processor reports the Channel Discrepancy fault.
The value applied here will affect all Dual NIO modules.
Changes to this value are not implemented until the TMR Processor is rebooted after the download of
the System.ini file.
Format :
dual_discrepancy_val=xx
Default is 2000.