Rockwell Automation HPK-Series Motor Encoder Replacement Installation Instructions - Manual

Installation Instructions
HPK-Series Motor Encoder Replacement Kit
Catalog Numbers HPK-B1307C-ENC, HPK-B1307E-ENC, HPK-B1308C-ENC,
HPK-B1308E-ENC, HPK-B1310C-ENC, HPK-B1609E-ENC, HPK-B1611E-ENC,
HPK-B1613C-ENC, HPK-B1613E-ENC, HPK-B1815C-ENC, HPK-B2010C-ENC,
HPK-B2010E-ENC, HPK-B2212C-ENC, HPK-B2510C-ENC
About This Publication
Each replacement kit is designed for the encoder type and version that is installed on a specific
model of an HPK-Series
™ motor. Refer to Catalog Number Explanation on page 3 for a chart
that defines the motor and encoder combinations.
Use this document if you are responsible for replacing the encoder on an Allen-Bradley ®
HPK-Series motor. Read all instructions before starting the replacement procedure.
Topic Page
About This Publication 1
Important User Information 2
Catalog Number Explanation 3
Before You Begin 4
Required Parts 5
Replacing Encoders 5
Preparing for Installation 5
Disassemble the Encoder - Original Version 6
Disassemble the Encoder - Later Version 8
Install the Replacement Encoder 10
Additional Resources 11