Rockwell Automation AADvance Controller OPC Portal Server - Manual (Page 30)

3-4 Document: 553701
(ICSTT-RM407_EN_P) Issue: 03:
OPC Portal Server User Guide (AADvance Controller)
The wizard populates the list of server functions automatically.
9) Click Next.
10) At the Where to place the generated configuration file step, do the
following:
a. If you wish to change the disk location of the file, for example to specify a
network drive, use the Destination Folder to specify the location. Otherwise,
leave this field blank to use the default location.
b. If you wish the OPC Portal Server to ignore the new file, for example because
the server is supporting another project, remove the tick in the box labelled
Update. Otherwise, make sure there is a tick in the box labelled Update.
11) Click Next.
The wizard generates the configuration file.
12) Configuration File Generation Complete! The final step shows the contents
of the configuration file, click Restart OPC Service Now.
13) Click Finish.