Rockwell Automation AADvance Controller OPC Portal Server - Manual (Page 29)

Document: 553701
(ICSTT-RM407_EN_P) Issue: 03:
3-3
12) Configuration File Generation Complete! The final step shows the contents
of the configuration file, click Restart OPC Service Now.
13) Click Finish.
Manually Configure the OPC Portal Server Manually Configure the OPC Portal Server Manually Configure the OPC Portal Server Manually Configure the OPC Portal Server
Note: Before you begin this task, you must have installed the OPC Portal Server and
rebooted the computer.
To configure the OPC Portal Server manually, without building or rebuilding a project,
do the following.
1)
Open the Tools menu within the AADvance Workbench application and click
ConfigGenTool.
The OPC Server configuration wizard starts.
The wizard provides a series of screens. Work through the screens in
sequence.
2) At the Source ISaGRAF Project Selection step, click Browse... and locate
your AADvance Workbench project file.
3) If the ISaGRAF file has password protection, complete the Password field.
4) Click Next.
5) At the Include ISaGRAF Internal Variables step, select the box Generate
OPC items for ISaGRAF internal variables, click Next.
6) At the Include Server Constants step, put a tick in the box labelled Include
automatic Server Constants.
The wizard populates the list of server constants automatically.
7) Click Next.
8)
At the Include Server Functions step, select the box Include automatic
Server Functions.