Rockwell Automation T80015 Application Note Trusted SC300E Migration Process - Manual (Page 11)

Trusted TM
AN-T80015
Issue 01 Apr 08 AN-T80015 Page 11 of 16
2.6. Mechanical upgrade
Remove the SC300E ICCBs and replace with the 3x Trusted TM 8161 Bridge Modules.
The Bridge module requires minimum configuration, namely the setting of Unit ID jumpers 0
to 3 to define the chassis address to Trusted™. These are situated on the Triguard chassis
as shown here.
The four backplane jumpers represent the binary address bits 1, 2, 4 & 8 respectively. On the
first SC300E chassis (containing the SC300E Bridge Modules), remove jumper 1 to
represent a Trusted
TM address '2'. On the subsequent SC300E chassis the jumpers must be
left as they are.
Connectors J1-3 on the TC-325-02 card, plug into the three 26-way diagnostic headers on
the SC300E backplane. The Hotlink cable from the Trusted
TM Expander Interface adapter
plugs into 12-way J4.