Rockwell Automation 57C423 Common Memory Module User Manual

Page 16

3Ć4

Step 4.

Take the old battery out of the holder. Remove the tape

from the new battery and insert the battery in the holder.

Make certain that the battery is facing the proper direction,

i.e., the end marked +" on the battery is facing the end

marked +" on the battery holder.

Step 5.

ReĆinsert the module into the correct slot in the rack. Use a

screwdriver to secure the module into the rack.

Step 6.

Turn on power to the rack. The BAT. OK" LED should be

lit.

This manual is related to the following products: