Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 23)

1–12 Scanner Features
Publication 2755-6.4
Power Supplies – Connects to RS-232,
keyboard wedge or scanner emulation
Synapse cable. Provides power to scanner➀.
•
100 - 240 VAC, 50 - 60 Hz
(Catalog No. 2755-HFP-D1)
•
Power cable for power supply, IEC 320
terminated, US 110V AC
(Part No. 77121-801-01)
•
Power cable for power supply, IEC 320
unterminated, US 240V AC
(Part No. 77121-801-02)
•
Power cable for power supply, IEC 320
unterminated, European 240V AC
(Part No. 77121-801-03)
➀
Some applications may not require a power supply if the host provides adequate
power for the scanner. The ability of the host to provide power varies with system
configurations. Scanner with cable requires 390mA at 5 volts (typical).
Keyboard Wedge Synapse Cables –
Connects between keyboard and host device.
Host device receives decoded bar code data
the same as keyboard input. See page 2–8.
•
For IBM XT/AT keyboard, 5-pin DIN
(Catalog No. 2755-HFC-SP1-01)
•
For PS/2 keyboard, 6-pin Mini-DIN
(Catalog No. 2755-HFC-SP2-01)
•
For DEC VT220, 320, 420 keyboards
(Catalog No. 2755-HFC-SV1-01)
•
For DEC VT520 keyboards
(Catalog No. 2755-HFC-SV2-01)