Criteria – Rockwell Automation 2755 2D Hand-Held Scanner User Manual

Page 103

Advanced Data Formatting

E–5

Publication 2755-6.4

Criteria

Code Types

Select any number of code types to be affected. All selected codes
must be scanned in succession, prior to selecting other criteria. If
you don’t select a code type, all code types will be ignored.

Code Length

Define the number of characters the selected code type must contain.
If you don’t select a code length, selected code types of any length
will be affected.

Message Containing a Specific Data String

Select whether the formatting will affect data that begins with a
specific character or data string, or contains a specific character or
data string.

•

Specific String at Start – Scan this bar code, than scan the
desired character or characters (up to 8) from the Alphanumeric
Keyboard bar codes.

•

Specific String Any Location – Scan this bar code, then, using
the the Numeric Keypad bar codes, scan a 2-digit number
representing the position (using a leading zero if necessary). Then
scan the desired characters (up to 8) on the Alphanumeric
Keyboard, followed by the End of Message bar code.

•

Any Message OK – By not scanning any bar code, all selected
code types will be formatted, regardless of information contained.