Rockwell Automation 2711 ControlNet Communications User Guide - Manual (Page 5)

ControlNet Communications 5
Publication 2711-6.10
Refer to the following pinout information to connect the PanelView
to a ControlNet network.
Important: Follow the ControlNet network layout and design as
specified in the ControlNet Cable System Planning and Installation
Manual (Publication 1786-6.2.1).
PanelView 900 Shown
Pin 1
NAP Connector
Redundant BNC Cable Connectors
Channel A
Channel B
Pin # NAP Signal
1 Signal Common
2 No Connection
3 TX_H
4 TX_L
5 RX_L
6 RX_H
7 No Connection
8 Signal Common
Shell Earth Ground
ControlNet cables, taps, connectors, terminators and repeaters are
available. Refer to the ControlNet Cable System Planning and
Installation manual (Publication 1786-6.2.1) for descriptions of
these components. For information on purchasing these items, refer
to the Allen-Bradley ControlNet Cable System Component List
(Publication AG-2.2).
Item Catalog No.
RG-6 quad-shield cable 1786-RG6
Coax repeater 1786-RPT, -RPTD
Coax taps 1786-TPR, -TPS, -TPYR, -TPYS
Network access cable 1786-CP
Coax toolkit 1786-CTK
Segment terminators 1786-XT
BNC connectors 1786-BNC, -BNCJ, -BNCP, -BNCJ1
Making ControlNet
Connections
NAP Connector Pinout
Definitions
NAP and Redundant
Cables