Rockwell Automation 2711-K5Axx_B5Axx PanelView 550 Terminals Installation Instructions - Manual (Page 7)

PanelView 550 Terminals 7
Publication 2711-IN009E-EN-P - February 2009
Cutout Dimensions
Use the full size template shipped with the terminal to mark the cutout dimensions.
The figure below shows a reduced size cutout.
Clearances
Allow adequate clearances for mounting, air flow, maintenance, and for installing a
memory card and legend inserts.
150 mm
(5.91 in.)
144 mm
(5.66 in.)
243 mm
(9.55 in.)
191 mm
(7.51 in.)
106 mm
(4.19 in.)
3.3 mm
(0.13 in.)
85 mm
(3.33 in.)
4.8 mm dia.
(0.188 in.)
3.3 mm
(0.13 in.)
25.9 mm
(1.02 in.)
Recommended Panel
Cutout Dimensions