Rockwell Automation 2097-Vxxxx Kinetix 300 EtherNet/IP Indexing Servo Drive Installation Instructions - Manual (Page 6)

6 Kinetix 300 EtherNet/IP Indexing Servo Drive
Rockwell Automation Publication 2097-IN001I-EN-P - July 2013
2. Mount the Kinetix 300 drive to the cabinet sub-panel with an M4 (#6-32) steel machine
screw torqued to 1.1 N•m (9.8 lb•in).
For catalog numbers 2097-V33PR1, 2097-V33PR3, 2097-V33PR5, 2097-V34PR3, and
2097-V34PR5 that use an AC line filter, refer to the AC Line Filter Installation
Instructions, publication
2097-IN003 , for the sub-panel mounting hole pattern.
Kinetix 300 Drive Mounting Dimensions
Cat. No.
Dimensions mm (in.)
Cat. No.
Dimensions mm (in.)
A B A B
2097-V31PR0 185.1 (7.29) 68.0 (2.68) 2097-V33PR3 185.1 (7.29) 68.5 (2.70)
2097-V31PR2 185.1 (7.29) 68.5 (2.70) 2097-V33PR5 185.1 (7.29) 94.4 (3.72)
2097-V32PR0 229.6 (9.04) 68.0 (2.68) 2097-V33PR6 229.6 (9.04) 68.0 (2.68)
2097-V32PR2 229.6 (9.04) 68.5 (2.70) 2097-V34PR3 185.1 (7.29) 68.5 (2.70)
2097-V32PR4 229.6 (9.04) 86.8 (3.42) 2097-V34PR5 185.1 (7.29) 94.4 (3.72)
2097-V33PR1 185.1 (7.29) 68.0 (2.68) 2097-V34PR6 229.6 (9.04) 68.0 (2.68)
11.8
(0.46)
6.6
(0.26)
7.1
(0.28)
B
38.1
(1.5)
182
(7.18)
190
(7.50)
30.8
(1.21)
Ø 4.57
(0.18) 3x
300
A
238
(9.37)
9.7
(0.38)
5.0
(0.19)
61.0
(2.40)
Dimensions are in mm (in.).
Additional clearance below the connector kit is necessary
to provide the recommended cable-bend radius.
2090-K2CK-D15M
Low-profile Connector Kit for Bulletin
2090 (flying-lead) Feedback Cable
2097-TB1
I/O Terminal
Expansion Block