Rockwell Automation 2097-Vxxxx Kinetix 300 EtherNet/IP Indexing Servo Drive Installation Instructions - Manual

Installation Instructions
Kinetix 300 EtherNet/IP Indexing
Servo Drives
Catalog Numbers 2097-V31PR0, 2097-V31PR2, 2097-V32PR0, 2097-V32PR2,
2097-V32PR4, 2097-V33PR1, 2097-V33PR3, 2097-V33PR5, 2097-V33PR6, 2097-V34PR3,
2097-V34PR5, 2097-V34PR6
About the Kinetix 300 Drives
Kinetix® 300 EtherNet/IP indexing servo drives provide an Ethernet-enabled solution for
applications with output power requirements in the range of 0.4…3.0 kW (2…12 A rms).
Refer to the Kinetix 300 EtherNet/IP Indexing Servo Drives User Manual, publication
2097-UM001 , for detailed information on wiring, applying power, troubleshooting, and
integration with ControlLogix®, CompactLogix™, or MicroLogix™ controller platforms.
Topic Page
About the Kinetix 300 Drives 1
Important User Information 2
Catalog Number Explanation 3
Before You Begin 4
Install the Kinetix 300 Drive 5
Connector Data 7
Power Wiring Requirements 12
Motor Overload Protection 15
Additional Resources 16