Rockwell Automation 2706-NP5 DL5 OFFLINE PROGRAMMER USER MANUAL - Manual (Page 30)

Chapter 4
Running DL5 Off-line Programmer
4–17
3. Answer [Y] or [N] if you want the message attributes printed. If you
select [Y], they are printed for every message in the range you selected in
Step 2.
You may use the cursor control keys to change a message number before
the last [ENTER] is pressed to begin printing.
4. Press [ENTER] to start printing after indicating whether or not to print the
message attributes.
5. Press [ESC] to abort and return to the Main Menu.
Select File Read/Write Functions from the Main Menu to transfer messages
between your computer and the DL5 Message Display.
You have the following choices:
•
Enter [1] to read an entire DL5 memory to a disk
•
Enter [2] to write from disk to DL5 memory
•
Press [END] to return to the Main Menu
Option 5
File Read/Write Functions