Rockwell Automation 2755 StrataSet Programming Software - Manual (Page 7)

1–2 Variable Content TTL:Chap Is Linked To HD:Running
Publication 2755-6.14
To start the Stratascan software:
1. Turn off power to PC and the reader.
2. Connect the communication cable provided, between the reader
and the RS-232C serial port (COM 1 or COM 2) located on the
PC.
3. Turn on the PC and the reader.
4. Change to the subdirectory where the STRATCFG.EXE file is
stored.
5. At the DOS prompt, type STRATCFG and press ENTER .
Note: If you are using a monochrome monitor and are having
difficulty seeing the highlighted menu choices, quit and restart the
program by typing STRATCFG/B at the DOS prompt. If you are
still experiencing difficulty seeing the highlighted menu choice, look
for the blinking cursor.
All the choices needed to configure your reader are available through
pop-up windows that appear when
ENTER is pressed at any of the
menu headings. At the Main Menu, highlight Configuration Screen
(or press
1 )and press ENTER to view the Configuration Screen.
Use the following method to view a pop-up menu:
1. Use the TAB, up, down, left, or arrow keys to move the highlight
to the desired menu choice.
2. Once the menu choice is highlighted, press ENTER . A pop-up
menu then appears with various option choices.
Use the following method to select item(s) from within the pop-up
menu:
1. Use the PAGE UP, PAGE DOWN, up arrow or down arrow keys
to position the cursor on the desired option.
2. If the menu is a multiple choice menu, such as the Interface
menu, press ENTER to select the desired option. If the menu
contains brackets [ ], then you may either select or deselect the
particular option. Press the
SPACE BAR to toggle the selection and
then hit ENTER when all selections are complete.
Using StrataSet Menus