Rockwell Automation 2755 StrataSet Programming Software - Manual (Page 19)

2–8 Configuring your Reader
Publication 2755-6.14
Miscellaneous Type Description
Beep after transmitting
When this option is enabled, the reader beeps after
each bar code is transmitted. If ACK/NAK is enabled,
the reader always beeps after receiving the ACK
command.
Beep before transmitting
When this option is enabled, the reader beeps before
each bar code is transmitted.
Faster Beep/Same Tone
When this option is enabled, the beeper tone remains
the same, but the beep duration is approximately 1/2
normal duration.
Lost Communication Timeout
When this option is enabled, the reader automatically
times out after 2 seconds, if unable to complete its
data transmission to the host. This is only valid in
modes where some type of handshaking is involved.
3 beeps on timeout
When this option is enabled, the reader beeps 3 times
when communications have timed out. Lost
communication timeout must be enabled for this
option to be valid.
razz beep on timeout
When this option is enabled, the reader produces a
razzberry tone when communications have timed out.
Lost communication timeout must be enabled for this
option to be valid.
5 retrys before timeout
When this option is enabled, the reader attempts to
re-establish communications 5 times before timing
out. Lost communication timeout must be enabled for
this option to be valid.
Support ‘D/E’ disable/enable
commands
When this option is enabled, the reader suspends
scanning when it receives an ASCII ‘D’ from the host
device. All timing functions continue. If the reader
receives an ASCII ‘ d’, scanning is again suspended,
plus all buffers are cleared as well. Scanning
resumes when the reader receives an ASCII ‘ E’ or
‘ e’. This feature only works with RS-232
communication.
Support ‘F/L’ Laser off/on
commands When this option is enabled, an ASCII ‘ F’ turns off the
lasers and ASCII ‘ L’ turns on the lasers.
Disable segmented decoding
This option disables UPC Split Code Algorithm. This
feature allows for increased scanning accuracy in
reading poor quality bar codes, but may slightly
reduce the aggressiveness of the reader.
Table continued on the next page.