Rockwell Automation 2361 Feedback Board Replacement - Manual

R EPLACEMENT K IT I NSTRUCTIONS
Feedback Board Replacement
(for 1250, 1650, and 3000A 1395 DC Drives)
Contents This document shows how to remove and replace the feedback board
in a 1250, 1650, or 3000A 1395 DC drive.
What This Kit Contains Using the table below, verify that you have received the appropriate
items in your kit:
Other Items Needed Before you begin, be sure you also have the following:
• Tools needed for:
• Removing, loosening, and tightening screws (slotted and
Phillips screwdrivers, plus a smaller screwdriver for ter-
minals)
• Removing, loosening, and tightening nuts (5/16” nut
driver or socket wrench)
• Measuring voltages and currents (multimeter)
• Documentation:
• Your drive system schematics
• Publication 1395-5.40, Bulletin 1395 Digital DC Drive–
User Manual
• Publication 2361-5.01, Bulletin 1395 Digital DC Drive in
Bulletin 2361 Motor Control Center for Drive Systems–
User Manual
For this part: You should receive this quantity:
feedback board 1