Rockwell Automation 1797-TPYS ControlNet Coax Taps - Manual (Page 7)

7
Publication 1797-5.18 - July 2006
4. If you mount the tap by using the transition plate, insert the self-taping
screws into the holes of the universal mounting bracket and tighten.
If you mount the tap without using the transition plate, insert the threaded
screws into the holes of the universal mounting bracket and tighten.
The tap is now ready to be mounted on a DIN rail.
5. Attach the tap to the DIN rail by snapping the universal mounting bracket
onto the DIN rail.
T-tap, Vertical Mount
DIN Rail
Universal Mounting Bracket
T-tap, Horizontal Mount
T-tap, Vertical
DIN Rail
Universal Mounting Bracket
T-tap, Horizontal
20081
31643
Transition Plate
Transition plate not used. Transition plate used.