Rockwell Automation 2711P-RAK12e Adapter Kit for PanelView 1200/1200E/1400E Keypad Terminal Cutout - Manual (Page 3)

Adapter Kit for PanelView 1200/1200e/1400e Keypad Terminal Cutout 3
Publication 2711P-IN015C-EN-P - March 2007
About the Cutout Adapter Plate
The cutout adapter plate is designed to fit into the existing cutout and stud-mounts
for the PanelView 1200/1200e/1400e keypad terminals. See the cutout assembly
dimensions.
Dimensions are given in inches (mm).
Parts List
The cutout adapter kit includes these items:
•
One keypad cutout adapter plate with gasket and ball bearing spacers
•
18, #10-32 nuts with flat washers
Required Tools
These items are required for installation:
•
Socket driver with 3/8 inch socket
•
Slot or Phillips screwdriver
•
Torque wrench capable of 10 lb-in
Front Bezel
13.85
(352) 9.5
(242)
0.80 (20)
0.34 (9)
0
12.48
(317)
8.48
(215)
5.15
(131)
5.48
(139)
18.20
(462)
1.48
(38)
0.29
(7)
0
1.85
(46) 1.85
(46) 15.30
(389)
19.0
(482.6)
13.69
(343)
13.97
(355) 10.07
(256)
1.95
(50)
1.95
(50)
0.13 (3)
Gasket
#10-32
Mounting
Studs
#10-32
Mounting
Studs
TYP 18 PLS.
18.66
(474)