Rockwell Automation 2711P-RAK12e Adapter Kit for PanelView 1200/1200E/1400E Keypad Terminal Cutout - Manual

Publication 2711P-IN015C-EN-P - March 2007
Installation Instructions
Adapter Kit for PanelView 1200/1200e/1400e
Keypad Terminal Cutout
Catalog Numbers 2711-NR5K, 2711P-RAK12E
About This Publication
This publication shows how to use the cutout adapter kit to mount these terminals
into an existing PanelView 1200/1200e/1400e keypad terminal cutout:
•
PanelView 1000/1000e keypad
•
PanelView Plus 1250 keypad
•
PanelView Plus CE 1250 keypad
•
RAC6182 12.1 in. keypad
Topic Page
About This Publication 1
Important User Information 2
About the Cutout Adapter Plate 3
Parts List 3
Required Tools 3
Disconnect Power to the Terminal 4
Remove the Existing Terminal from the Panel 4
Attach the Cutout Adapter Plate to the Panel 4
Mount the New Terminal in the Cutout Adapter Plate 5
Additional Resources 6