Rockwell Automation 6176M-xxxx Standard Industrial Monitors Installation Instructions - Manual (Page 20)

20 Industrial Standard Monitors
Rockwell Automation Publication 6176M-IN001E-EN-P - August 2012
Secure the Cables
Use optional cable ties to organize the monitor cables and secure them to the cable restraints on
the back of the monitor. Organizing your cables provides easier access and identification.
Backlight Assembly Disposal
Ship or Transport the Monitor
If you need to ship the monitor via common carrier or transport it to another location, you must
first uninstall the monitor and place it in its original packing material.
ATTENTION: The backlight assembly in this monitor contains mercury. At the end of its life, this
monitor should be collected separately from any unsorted municipal waste.
ATTENTION: Do not ship or transport the monitor when it is installed in a machine, panel, or rack.
Doing so may cause damage to the monitor. You must uninstall the monitor and place in its
original packing material before shipping. Rockwell Automation is not responsible for damage
incurred to a monitor that is shipped or transported while installed in a machine, panel, or rack.
Optional
Cable Ties
Monitor Cables
Cable Restraints on Back of Monitor