beautypg.com

General specifications – Rockwell Automation 2085-IF4_IF8_OF4 Micro800 4-channel and 8-channel Analog Voltage/current Input and Output Modules User Manual

Page 10

background image

10 Micro800 4-channel and 8-channel Analog Voltage/current Input and Output Modules

Publication 2085-IN006A-EN-P - September 2012

Power dissipation, total

1.7 W

3.7 W

1.75 W

Enclosure type rating

None (open-style)

Status indicators

4 red error indicator

I red error indicator

8 red error indicators

Isolation voltage

50V (continuous), Reinforced Insulation Type, channel to system and channel to channel.
Type tested at 720V DC for 60s

North American temp code

T4

(1)

Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines,
publication

1770-4.1

.

(2)

RTB hold down screws should be tightened by hand. They should not be tightened using a power tool.

Input Specifications – 2085-IF4 and 2085-IF8

Attribute

2085-IF4

2085-IF8

Number of Inputs

4

8

Resolution
Voltage
Current

14 bits (13 bits plus sign bit)
1.28 mV/cnt unipolar; 1.28 mV/cnt bipolar
1.28

μ

A/cnt

Data format

Left justified, 16 bit 2s complement

Conversion type

SAR

Update rate

<2 ms per enabled channel without 50 Hz/60 Hz rejection, <8 ms for all channel
8 ms with 50 Hz/60 Hz rejection

Step response time
up to 63%

4…60 ms without 50Hz/60 Hz rejection – depends on number of enabled channel and
filter setting
600 ms with 50 Hz/60 Hz rejection

Input current terminal,
user configurable

4…20 mA (default)
0…20 mA

Input voltage terminal,
user configurable

±

10V

0…10V

Input impedence

Voltage terminal >1 M

Ω

Current terminal <100

Ω

Absolute accuracy

±

0.10% Full Scale @ 25

°

C

Accuracy drift with temp

Voltage terminal – 0.00428 % Full Scale/

°

C

Current terminal – 0.00407 % Full Scale/

°

C

Calibration required

Factory calibrated. No customer calibration supported.

Overload, max.

30V continuous or 32 mA continuous, one channel at a time.

Channel diagnostics

Over and under range or open circuit condition by bit reporting

General Specifications

Attribute

2085-IF4

2085-OF4

2085-IF8