Select the default project file (.pfe) – Rockwell Automation 2711P Creating Modbus Applications User Manual

Page 16

Publication 2711P-UM002B-EN-P - March 2007

16 Configuring KEPServer Drivers for Modbus

2. Create a new KEPServer project (.pfe) file. From the menu,

select File>Save As and save the project as a .pfe file.

Select the Default Project
File (.pfe)

The steps in this section ensure that the correct project file is used in
your RSView Studio application.

When RSView Studio creates a runtime application and the application
contains the KEPware OPC server, RSView Studio will merge the
KEPware project file (.pfe) into the runtime file (.mer). The project file
that RSView Studio uses is defined by the Default project field in the
General tab of the Tools>Options menu in KEPware Server
Enterprise.

1. From the Menu bar, select Tools>Options…

2. On the General tab, click the

button next to the Default

project textbox.

3. Select the desired .pfe file and click the

button.

TIP

This may not be the current configuration running in
KEPware Server Enterprise. If you are testing the
application on a PC, make sure the project name in
the title bar of KEPware Server Enterprise matches
the Project default field.