Rockwell Automation 2364P Overhead Bus for Bulletin 2300 MCCs - Manual

Publication 2364P-5.10 - December 1999
Installation Instructions
Overhead Bus for Bulletin 2300 MCCs
For Use in Parallel Bus Supply Configurations
Contents This document shows how to install overhead bus assemblies on to Bulletin
2300 Motor Control Centers (MCCs).
What This Kit Contains This kit contains the necessary quantities of the following parts, as needed
and called out on your Certified Cabinet Outline Drawing (often labeled as
DS-drawing number) that is shipped with your drive system schematics.
Refer to Figure 1 for part types that may be included in your kit.
Figure 1
Parts That May Be Included in Your Overhead Bus Splice Kit
Splice Assemblies
Splice-Joiner
Assembly Feeder Splice
Assembly
End Cap Bus Tabs
23” Bus Tab 2.5” Bus Tab 4” Bus Tab
Overhead Bus Assemblies
20” Overhead
Bus Assembly 25” Overhead
Bus Assembly 30” Overhead
Bus Assembly 35” Overhead
Bus Assembly