beautypg.com

Startup/power on, Using the ac adapter/charger, Power save reactivation – Rockwell Automation 2727-T7P30D1Fxx MobileView Tablet T750 Quick Start User Manual

Page 4

background image

4 MobileView™ Tablet T750

Publication 2727-QS004B-EN-P - September 2004

2. To close the battery compartment, gently slide

the battery cover-plate up.

Startup/Power On

Press the ENTER button to turn the MobileView Tablet
ON.

If the battery level is sufficient enough, the following
power-up screen should appear.

If power-up screen does not appear, connect the MobileView Tablet to the ac
adapter/charger to operate on ac power and charge the battery.

Using the AC Adapter/Charger

Plug the jack end of the cable from the AC adapter
into the charger port as shown. The battery will
recharge when connected to external power.

Use only the AC Adapter supplied
with your MobileView Tablet. Using
another type of adapter may cause
a malfunction or damage the
battery pack.

Power Save Reactivation

The MobileView Tablet T750 also includes a battery power saving feature that
suspends Tablet operations, including screen operations, if Tablet is idle beyond
suspend timer setting. The default setting is 5 minutes. To reactivate Tablet, press

IMPORTANT