Rockwell Automation 2705-DN42 DeviceNet Interface Communicaton Board - Manual (Page 3)

3
The RediSTATION receives all power and communications through
the DeviceNet cable. A separate power supply is not required. This
is the only external connection to the RediSTATION.
The RediSTATION connects to the DeviceNet using the DeviceNet
terminal block on the communication board.
DeviceNet
Terminal Block
Terminal Signal Function Color
1 COM Common Black
2 CAN_L Signal Low Blue
1
3 SHIELD Shield Uninsulated
4 CAN_H Signal High White
5 VDC+ Power Supply Red
6
6 E. GND Chassis Ground Green
DeviceNet cables and components are available from Allen-Bradley
as separate catalog numbers.
It is your responsibility to install and implement the DeviceNet
network and supported devices according to the DeviceNet
guidelines.
DeviceNet Connection
DeviceNet Components