Rockwell Automation 2100 CENTERLINE Low Voltage Motor Control Centers User Manual
Page 8
8
Rockwell Automation Publication 2100-IN012E-EN-P - February 2012
Preface
You can view or download publications at
o order paper copies of
technical documents, contact your local Allen-Bradley® distributor or Rockwell
Automation sales representative.
The documents in the following table are referenced in this document and can be
obtained from their respective organizations.
Purchased Components and
Additional Instruction
Sheets
When equipment such as transformers, metering, programmable controllers, or
drives are supplied with the motor control center (MCC), specific publications
are shipped with the units. These documents should be read and understood
before installing and operating the MCC.
CENTERLINE Motor Control Centers Installing a Pull Box on a Bulletin 2100
Vertical Section Installation Instructions, publicatio
Provides instructions on installing a Pull Box on a motor control center.
Safety Guidelines for the Application, Installation, and Maintenance of Solid-
state Control Installation Instructions, publication
Provides safety guidelines for the application, installation, and
maintenance of solid-state control.
Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1
Provides general guidelines for installing a Rockwell Automation
industrial system.
Product Certifications website,
Provides declarations of conformity, certificates, and other certification
details.
Resource
Description
Resource Website
National Electrical Manufacturer’s Association (NEMA)
• NEMA ICS 1-2000 Industrial Control and Systems: General
Requirements
• NEMA ICS 2.3-1995, Instructions for Handling, Operation and
Maintenance of Motor Control Centers Rated Not More Than 600V
National Fire Protection Association (NFPA)
• NFPA 70 - National Electrical Code
• NFPA 70A - Recommended Practice for Electrical Equipment
Maintenance
• NFPA 70E - Standard for Electrical Safety in the Workplace
Institute of Electrical and Electronic Engineers (IEEE)
IEEE standard C37.20.7 - IEEE Guide for Testing Metal-Enclosed
Switchgear Rated Up to 38 kV for Internal Arcing Faults